Maneurop MTZ160HW4AVE MTZ160-4VI Reciprocating Cold Room Compressors
Danfoss Maneurop Reciprocating Compressors MTZ160HW4AVE 1.Product introduction: Maneurop Reciprocating Compressors Model NO: MTZ160HW4AVE Motor protection：Internal overload protector Type：MTZ Phase：3 Power Source: AC Power Transport Package: Wood Package Trademark:Maneurop(Danfoss) Origin:...
Description
Model MTZ160HW4AVE Maneurop Reciprocating Compressors
1.Product introduction:
Configuration code：Single
Connection type：Rotolock
Cylinder：4
Description：MTZ160-4
Diameter [mm]：352 mm
Discharge connection height [mm]：125 mm
Discharge connection mounting torque [Nm]：90 Nm
Discharge connection pipe size [in]：3/4 in
Discharge connection rotolock size [in]：1 1/4 in
Discharge connection size [in]：1 1/4 in
Discharge connection sleeve pipe size [in]：3/4 in
| Name | Reciprocating Compressors |
| Model | MTZ160HW4AVE |
| Power | 380-400V/50hz, 460V/60hz |
| Nominal cooling capacity at 50Hz | 20.3KW |
| Technology | Reciprocating |
| Oil reference | 175PZ |
| Min | 1 |
To troubleshoot the compressor suction temperature is too high, you can do this:
① Properly increase the opening degree of the thermal expansion valve and increase the liquid supply to the evaporator to meet the demand of the refrigeration load, which can reduce the suction temperature;
② Do a good job in the insulation treatment of the compressor suction pipe to prevent a large amount of harmful overheating, and also reduce the excessively high suction temperature;
③ Adjust the return air duct and shorten its length as much as possible to reduce harmful overheating conditions. Doing this can eliminate the problem of excessively high suction temperature of the compressor.
The scroll compressor is a positive displacement compressor, and the compression components are composed of a movable scroll and a fixed scroll. A number of structural features are included that allow the bypass flow of gas through the compressor housing to reduce entrained oil.
After entering the housing, some of the gas flows upwards to reduce the amount of gas flowing down towards the oil. To achieve this, the motor of the compressor may be surrounded by a sleeve having upper and lower holes for directing air flow to the upper and lower stator end turns of the motor.
Hot Tags: Maneurop MTZ160HW4AVE MTZ160-4VI Reciprocating Cold Room Compressors, manufacturers, suppliers, factory, cheap, in stock, Maneurop Compressor For Vegetable Cold Storage, Danfoss Piston Compressor For Refrigeration Unit, Danfoss Piston Compressor, Maneurop Compressor For Cold Storage, Maneurop Compressor For Condensing Unit, Danfoss Hermetic Piston Compressor
