Performer HVAC R22 Compressor

Performer HVAC R22 Compressor HCM120T4LP6 for R22

Refrigeration Tips:

The compression of Performer scroll HVAC R22 compressor is completed by two vortexes on the upper part of the compressor, which are located above the motor. The suction enters the compressor through the suction port, and the gas flows around the motor and enters the motor through the opening at the bottom of the motor. The oil is separated from the suction and dripped into the sump. All gases pass through the motor to ensure complete cooling of the motor in all cases. The gas leaves the motor and enters the turbine disk.

The compressor has two vortexes: a moving vortex disk and a static vortex disk. The center of the moving vortex disk moves around the center of the static vortex disk under the drive of the main shaft. This motion produces compression between the two vortexes. Low pressure gas enters the suction chamber. With the movement of the moving vortex disk, compression is a continuous process. In the second circular motion, part of the gas is compressed, Another part of the gas is entering the vortex disk, and another part is being discharged. The volume of the cavity decreases gradually. When the cavity reaches the center, that is, the exhaust port, the pressure reaches, which goes through three complete circular motions.

Our clients:

Hot Tags: performer hvac r22 compressor, manufacturers, suppliers, factory, cheap, in stock, R22 Performer Compressors, Danfoss Scroll Compressors, R410a Bleu Refrigeration Compressor, 7HP Performer Compressor, 25HP Scroll Refrigeration Compressor, 10HP Danfoss Compressor For Refrigeration Unit