Hanbell Screw Compressor

Brand:Hanbell

Model:RC2-180B

Orginal:CN/Taiwan

Oil charge:7L

Net weight(kg):335

Displacement:3550

Voltage:380V-420V 3PH~50/60hz

Oil Heater:150watts

Send Inquiry

Description

66hp High-efficiency Hanbell screw compressors RC2-180B for water chillier

HANBELL RC2 series semi-hermetic screw compressor is developed especially for applications in air-conditioning and refrigeration. With high operating load design, each HANBELL compressor is of high efficiency and reliability in all operating conditions such as thermal storage, heat pump system & refrigeration

RC2 Series Features As Below

Advanced 5-to-6 patented Screw Rotor Profile designed to ensure high capacity and efficiency in all operating conditions

Simple and robust design which provides high reliability and low vibration and noise level

High efficiency motor. Premium grade low-loss core steel with special motor cooling slot and refrigerant guide vane which pilot the cold suction refrigerant gas through the motor provides the highest operating efficiency possible no matter how strict operating conditions are

Brand:Hanbell

Model:RC2-180B

Orginal:CN/Taiwan

Oil charge:7L

Net weight(kg):335

Displacement:3550

Voltage:380V-420V 3PH~50/60hz

Oil Heater:150watts

LRA R22, R407C, R404A, R507A, R134a
Hertz	Volts	Maximum Continuous Current	Y △		Part Wind Start
			Locked Rotor Amps (Y)	Locked Rotor Amps (D)	Locked Rotor Amps (D)	Locked Rotor Amps (DD)
60	220	249	310	930	444	840
60	460	119	162	485	239	450

Standard Compressors Accessories

Complete Protection & Accessories

1. Motor temperature Sensor

PT100 or PT1000 embedded inside motor winding

In-time motor temperature monitor

As control point for liquid injection to motor

2. Discharge Port and Motor Temperature Thermistor

PTC embedded inside motor winding

Proactive and prompt reaction when overheating occurs

3. Liquid Injection Connector (Motor and Chamber)

Available for addtional cooling requirement

4. Oil Cooler Connector

Available for oil cooler or external oil circuit design

4. Oil Level Switch

Proactive and prompt reaction on insufficient lubricant

5. Oil Heater (150W or 300W)

Maintain lubricant viscosity before compressor start

6. Oil Pressure Connector

Monitor pressure differential (Ps-Po and Pd-Po)

Oil filter clogging monitor

Other Advantages

Low noise level and minimum vibration
Fewer quantity of parts in screw compressor than those in reciprocating compressor
Easy for maintenance and overhaul
Compact geometry, easy for layout