How to Install a Cold Storage？(1)
Apr 26, 2023
The installation requirements of the assembled cold storage are as follows:
1. The ground is required to be flat, solid, and have load-bearing capacity, without water accumulation, potholes, or settlement.
2. The installation site should have good ventilation conditions, and no open flames, harmful gases or chemicals and other dangerous items should be stored.
3. It is recommended to install it indoors and within a safe distance from flammable and explosive items to ensure safety.
4. Before installation, carefully check whether the quantity and specifications of cold storage components and accessories meet the requirements to ensure that the accessories are complete.
5. During the installation process, the installation instructions provided by the manufacturer should be strictly followed to ensure the installation quality.
6. When assembling the cold storage, care should be taken to protect the surface of the cold storage, and it must not be scratched, damaged, bent, etc.
7. The installation of cold storage must use professional tools and equipment, and be operated by experienced technicians to ensure safety and quality.
8. After the installation is completed, strict inspection and testing should be carried out to ensure that the cold storage is in normal operation, all piping and electrical equipment meet the requirements, and there is no leakage or malfunction.
9. Before use, the cold storage must be fully cleaned and disinfected to ensure that the stored items meet hygienic standards.
Technical requirements for cooling fan installation:
1. When choosing the location of the lifting point, first consider the location with the best air circulation. Secondly, consider the direction of the library structure.
2. The gap between the air cooler and the storage board should be greater than the thickness of the air cooler.
3. All hanging bolts of the air cooler should be fastened. And use sealant to seal the holes of bolts and hanging bolts to prevent cold bridge and air leakage.
4. When the ceiling fan is too heavy, use angle 4 or angle 5 iron to make beams. The lintel should span to another roof and wall panels for load-bearing relief.
If you want to consult about cold storage, please open the instant chat or send an email to contact us!
