Refrigeration Compressor Maintenance Or Troubleshooting

Regularly check the valves for manual drainage and exhaust to prevent leakage caused by inadequate valve closing.

The textile industry is a machine-intensive industry. It has many equipments, long pipelines and many joints. There are many types of takeover materials and joint forms, which determines the number of leakage points. Therefore, the management of the pipeline network is not only the work of the gas supply unit, but also the work that all gas points pay attention to. Only in this way can we prevent leakage, save energy and reduce consumption. Therefore, regular leak detection and timely plugging are very important.

(1) According to different processes, set the appropriate auxiliary spray pressure to meet the production needs and ensure the quality of the grey cloth. The auxiliary spray pressure should never be set too high to avoid waste. If the auxiliary injection pressure is set too large, it is necessary to not only increase the air supply pressure and increase the operating cost, but also increase the single unit's gas consumption.

(2) Regularly check pipe joints and auxiliary spray solenoid valves, timely maintenance and replacement, and prevent leakage. An auxiliary spray solenoid valve is normally open, which is equivalent to adding two more solenoid valves. When the leakage solenoid valve accumulates to a certain number, the gas load will continue to increase, and then the plugging work becomes very important.

(3) When there is a large change in the gas load, the gas department should contact the gas supply department in time to adjust the number of air compressors or the load of the air compressor in time to avoid waste caused by excessive supply.

The energy saving and consumption reduction of the compressed air system has a long way to go. Only by paying attention to every detail in the work and starting from the bit by bit, can the energy consumption of the compressed air system be reduced.