The Role Of Compressors In Power Plants

Every power plant requires a screw  compressor. The first application of  compressor power plants is for blowing dust, and the other is for general pneumatic and pneumatic tools.

1. Used for pneumatic and pneumatic tools

1.1The water treatment system of power plant is generally divided into boiler make-up water treatment system and industrial wastewater treatment system. There are some pneumatic diaphragm valves and pneumatic instruments between these valves and instrument system equipment, and the action is realized by the application of the air compressor power plant. In the wastewater treatment system, a part of compressed air is also used in pneumatic equipment;

1.2 Air compressor power plant application is used to purge the pipeline or to repair the air supply of the compressor of the machine, sometimes used for pneumatic tools.

In addition, the operation of thermal power plants in power plants requires a large number of control instruments to support operation, and the actions of these control instruments are controlled by the application of air compressor power plants.

2, for blowing dust

Combustion produces a large amount of dust attached to the inner wall of the boiler. The long-term accumulation causes the heat transfer efficiency to decrease, and the fuel cost increases accordingly. The thermal efficiency of the water jacket furnace is low to a certain degree or the pipe wall is blocked and cannot be ignited. At this time, the maintenance cost is relatively high and the service life of the water jacket furnace is shortened.