Is it normal to start the compressor

1. Click the car to start the compressor and check whether the rotation direction is correct.

2. Pay attention to whether the reading of the oil pressure gauge is normal and whether the oil supply of the oil injector is good after driving.

3. Lubricating oil pressure should not exceed 0, 3 MPa, and keep above 0, 1 MPa.

4. Whether there are knocking sounds and impact sounds in the ear movement part and the cylinder. If there is abnormal sound, the air compressor must be stopped to find out the cause and eliminate it.

5. Open the valve on the air inlet pipe to make the air compressor run with load, and close the vent valve of the exhaust pipe to make the pressure rise slowly.

6. Check the exhaust pressure at all levels, exhaust temperature at all levels, inlet and outlet temperatures, cooling water pressure, and lubricating oil pressure are within the specified range.

7. Check whether the load of the motor is within the rated range according to the reading of the ammeter.

8. Check whether the surface of the piston rod is overheated and whether the packing is normal.

9. Check the firmness of the motor and body fixed on the foundation.

10. Pay attention to whether the pipeline vibrates abnormally.

11. It is generally not allowed to start the air compressor with multiple intermittent methods.